When my AC Compressor seized, it tore my six hex bolts on the crankshaft pulley. These six bolts pass through the Crankshaft Pulley, Balance Plate or Wheel and the Timing Wheel, which is keyed to the Crankshaft.
I am repairing the damage now, but unfortunately when I removed everything I did not match mark the three components that are mounted to the front Crankshaft, which are (1) the main pulley, (2) the middle component, which I assume is a Harmonic Balancer or Balance Plate, (Its large flat and round.) and the (3) the timing wheel
I m terrified that when I place these parts back on the front of the crankshaft at largely Random Positions instead of their match-marked Original Positions, the engine will vibrate like H______.
Can you please give me some input.