Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 06-15-2003, 05:03 PM
Registered User
 
Join Date: Jun 2003
Posts: 18
Angry Starter wont engage

I have a 75 MB 240D. The Benz will not start, I have had the starter checked and also turned the flywheel to make sure that the engine turns over, I get a noise when I go to try to start like the solinoid is bad but my parts guy tells me that the starter is fine, I have tried to jump start it with no luck and charged the battery but the car wont start. The engine will not even turn over, also, someone had told me that the benz could be Hydrolocked, when I was looking at the injector pump, I noticed a green wire along with my starter wires going to a clip that clipped onto the side of the block next to the pump, just hanging on with a few strands of wire. Any ideas if this could be my problem why my benz wont turn over? This has completely confused me and any help would be greatly appreciated. Also, any help with fixing the Hydrolock would be great also.

Thank you,

Luckydog1

Reply With Quote
  #2  
Old 06-15-2003, 10:00 PM
Registered User
 
Join Date: Aug 2001
Location: Evansville, Indiana
Posts: 8,150
Does the starter turn at all, or is it inert?

If it turns and screeches, the overrunning clutch is shot had need to be replaced -- the is a one-way clutch that keeps the engine from driving the starter it you keep the key engaged after it starts. When it goes bad it screeches and won't let the starter turn the engine.

Certainly you need to splice the wire, but I though the starter wire was purple rather than green.

What you need to do next is to connect a test light or voltmeter to the starter solenoid on the start connection (the one that the battery cable ISN'T connected to) and attempt to start. If you have 12 V (0r the light lights up bright), the solenoid and/or starter are bad. If you get nothing, either the neutral safety switch, the wiring, or the key switch are bad. If you get low voltage or a dim glow, you ahve a bad or corroded connection somewhere.

This will at least tell you what you need. Don't depend on a mechanic unless he/she actually knows these cars.

You won't be able to rotate a hydrolocked engine with the flywheel or with a wrench on the crank pulley bolt.

If you get a stolid 'THUNK' but no engine rotation, and the dash lights (or headlights if on) go out, either the engine is locked up (you said it isn't) or the starter is. I jsut repalced the starter on the 300D last month for this very reason-- locked up tight.

Peter
__________________
1972 220D ?? miles
1988 300E 200,012
1987 300D Turbo killed 9/25/07, 275,000 miles
1985 Volvo 740 GLE Turobodiesel 218,000
1972 280 SE 4.5 165, 000 - It runs!
Reply With Quote
  #3  
Old 06-16-2003, 04:42 PM
Maxwell's Avatar
Registered User
 
Join Date: Feb 2003
Location: Los Angeles, CA
Posts: 123
Does the starter spin freely or does nothing happen at all?

__________________
83 240D four bagger stick diesel 276K
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 09:17 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page