No Start after IP Replacement
 

Hello again

Well still no luck, I replaced the injector pump on my 87 SDL. I only get fuel out of the #2 line from the pressure valve. I used an elec pump to ensure the system is bleed but no luck starting.

Can anyone think of anything I can do or undo to get it running again. I need help


Thanks Mikesdl
:confused:

You replaced it with a new one, used one, rebuilt one ? Did you have it checked by someone before installing it ? It could simply be bad... and it not be something you have or have not done... even new parts can sometimes be faulty.... and that is the last thing you question when you put something new on..... will drive you crazy....

Thank For Your response

I replaced the injector pump on my 87 300sdl (rebuilt not checked), now i can't get it started(No fuel to pressure valves. tried bleeding th system by cracking the lines still nothing. On installing the new pump 15 ATDC with notch in opening.


MikeSDL


Should I send the injectors in with the pump to get it checked?:confused:

It's been a while since you last posted.

I remember you had a nailing problem.

Did you get that fixed, or is the IP replacement related to the nailing issue?

Hey

Yea the IP replacement in for the nailing problem. From one promblem to another, but it still a great car

MikeSDL