Anyone have an assy diagram for the 617 vacuum pump? One part I have a ? on.

__________________
1984 300D Turbo - 4-speed manual conversion, mid-level resto

1983 300D - parts car

1979 300TD Auto - Parts car.

1985 300D Auto - Wrecked/Parts.


=========================

"If you don't know where you are going, any road will get you there". Lewis Carrol

You mean for the whole thing?
Or just what you need to change out the diaphram?
There are at least two models.. do you know which yours is ?
Do you know the Mercedes name for the part you have a question on ? I will try to answer from the manual if you can get a little closer to your needs....
What are you trying to do to it ?

maybe this will help:

http://www.peachparts.com/shopforum/showthread.php?threadid=46613&highlight=vacuum+diaphram+tcane

Thanks, mine is the piston type. I already have it back together, principle question was which way are the check valves mounted, but looking at the front cover, they can only be mounted in the correct configuration (side-by-side ones "down", other end single mounted "up".) THanks again for the help though!!

__________________
1984 300D Turbo - 4-speed manual conversion, mid-level resto

1983 300D - parts car

1979 300TD Auto - Parts car.

1985 300D Auto - Wrecked/Parts.


=========================

"If you don't know where you are going, any road will get you there". Lewis Carrol