603 crossover tube into an intercooler... - PeachParts Mercedes-Benz Forum

300SDLandRover · #1 09-21-2013, 12:23 PM

I installed it post turbo,(work on semi trucks, thats how they're mounted,before visiting these forums, didnt think to mount in manifold) 0-60 run WOT will run up to 600* which according to best guestimates would yield 900* or so? Cant find anywhere i can push it farther. Really want to try a water to air intercooler now that you mention it, and weld an inlet on the opposite side of intake like yours. Maybe next year with taxes...

winmutt · #2 09-23-2013, 01:48 AM

Quote:

Originally Posted by 300SDLandRover

I installed it post turbo,(work on semi trucks, thats how they're mounted,before visiting these forums, didnt think to mount in manifold) 0-60 run WOT will run up to 600* which according to best guestimates would yield 900* or so? Cant find anywhere i can push it farther. Really want to try a water to air intercooler now that you mention it, and weld an inlet on the opposite side of intake like yours. Maybe next year with taxes...

The awic I bought was under 200 and sounds like you can do the welding yourself. I really think it's the ideal way to go.

300SDLandRover · #3 09-23-2013, 02:12 AM

Ya it does. I found a nice one for $149. I have a good sized heater core from a semi with dual electric fans mounted on it, and a massive Edelbrock fuel pump i can use, all i would need is a plastic overflow tank from a wrecking yard!

winmutt · #4 09-23-2013, 12:28 PM

Quote:

Originally Posted by 300SDLandRover

Ya it does. I found a nice one for $149. I have a good sized heater core from a semi with dual electric fans mounted on it, and a massive Edelbrock fuel pump i can use, all i would need is a plastic overflow tank from a wrecking yard!

I would use a much larger tank in the trunk for some real power. Also the SLS tank might be a nice fit!

300SDLandRover · #5 09-24-2013, 04:38 AM

The Land Rover Discovery has a (no bull****) 3gal WASHER FLUID RESEVOIR. Just got a ARB bumper off one at my wreckers for mine, woulnt be too hard to mount where my LR air filter box is now, (intake side would be reversed with OM603 swap.)