![]() |
|
|
|
#1
|
|||
|
|||
500E oil change using Topsider
Anyone have experience changing oil with the topsider?
I sucked out the oil from the dipstick and removed the filter, then pulled the oil out of filter housing. I only got about 6 qts out....I might have been down a quart so I would expect 7, does the engine hold that much oil in the top end? Question: Should I fill the oil filter housing with any oil ? When filling I put in 7.5 qts....it seems very full. Does the Topsider leave a half quart someplace? Is this normal....this is the first time I have attempted an oil change in 7 years....always have the dealer do it.... Been using Mobil 1 15W-50 for last 4 years. Upon starting it made alot of noise for a second then was fine. ( I assume this is because there wasn't oil in the filter housing to be pumped to the top end) I did notice the pressure is reading 1.6-1.8 bar at warm idle and 3 bar above idle. It was running 1.5 and 3.0 but would drop down off 3.0 pretty easily....this seems to be a common characteristic of the 119 motor. Pressure is constant, not fluttering. Thanks for any info.
__________________
Bryan Harter 1992 500E Smoke Silver 2002 CLK55 AMG Cab Silver/Black 2001 Harley Fatboy - Pearl White 2004 F150 FX4 Silver/Grey 1969 GTO Liberty Blue 1956 F100 Black |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
oil change | wyoo | Tech Help | 43 | 03-29-2017 02:54 PM |
UPDATE - 560SEL Oil Pressure - SUCCESS!! | moedip | Tech Help | 5 | 10-06-2008 06:48 PM |
Kablam !! Big bang. Cracked valve cover | Anon-E-Mouse | Diesel Discussion | 49 | 07-27-2002 04:01 PM |
Oil change | aantonic | Tech Help | 6 | 08-24-2001 11:10 PM |
Oil Change Frequency | mrbroche | Tech Help | 34 | 05-31-2001 11:03 PM |