![]() |
|
|
|
#1
|
|||
|
|||
![]()
To recover a check engine code I made a home made tool . A family emergency distracted me and I wired it wrong . Latter in the week I tried to recover the check engine code and discovered my mistake . Now the dash warning lights all flash and the oil pressure and other guages dance when the car starts . How bad have I shot myself in the foot ?
|
#2
|
|||
|
|||
Have you checked for a blown fuse on the Over Voltage Potection relay?
__________________
Resistance is Futile. |
#3
|
|||
|
|||
![]()
I had checked the base module fuses and they were good . After your post I went back and found a fuse labled " residual engine heat storage system " that was blown . I replaced the fuse and now the dash works again . My foot is feeling better , thank you
|
#4
|
|||
|
|||
![]()
After my flashing dash incident , my check engine light has again come on . This time I can not connect or read any code . The check engine light was off for about a month , car drives fine . I think I shorted the read out module ?
|
![]() |
Bookmarks |
|
|