Hay Jim, engine looks good !! can you tell where the wires from the tranny need to go ?? is there a ecm for that tranny to plug into ? and the other parts.. the power steering pump and fan pully plus 2 bolts had 2 need 2 more.. is there also a engine oil cooler and tranny cooler ? the vacume pump is missing the hose and drive shaft stub that you had talked about any more ideas thats might work there way into you thinker that ya might pass along to me thanks.. Rich..

Hey
I am looking for a Left rear door, and L rear fender and front bumper for a 1971 220.
Will the 220D you have work?
Thanks

__________________
Ron
2015 Porsche Cayman - Elizabeth
2011 Porsche Cayman - Bond,James Bond
Sadly MERCEDESLESS - ALways LOOKING !
99 E320 THE Queen Mary - SOLD
62 220b - Dolly - Finally my Finny! Sadly SOLD
72 450SL, Pearl-SOLD
16 F350 6.7 Diesel -THOR
19 BMW X5 - Heaven on Wheels
14 38HP John Deere 3038E Tractor -Mean Green
84 300SD, Benjamin -SOLD
71 220 - W115-Libby ( my first love) -SOLD
73 280 - W114 "Organspende" Rest in Peace
81 380 SL - Rest in Peace

I need a part that I don't have a name for: It is a cylindrical piece that holds down the oil pump. It is accessed next to the front side of the injection pump on my 1979 300TD engine--same as 300D. If you have the part, let me know. Thanks

Are you talking about the vacuum pump on the front of the engine on the driver's side????? Jim

__________________
James A. Harris

W126 Passenger visor latch? Creme beige interior

The thing the visor catches to?

Also, any W126 wood?

Thanks

__________________
1989 300SE 155k
1998 HD Road King/Iron Butt Member)
2006 Nike Air Max Moto

looking for a similar passenger visor latch in grey. Also looking for the rear door locking posts. Most dash wood. 300 sd floor mats Seat covers or inexpensive seats. Clock knob, dimmer/trip knob. There's the few I can think of now.

Hi! I am looking for a drivers side hood latch for my 85 300sd. I have the newer style latch which has the pull release in the grille.

Do you have one?

Thanks,

David

please let me know if available, cost, location of parts and condistion. Mine are sun baked and cracking apart.

Doug Beabout
db@DougBeabout.com

hello,
I need a few parts for my W123 84 300D

3 good Vacuum Change-Over Valves

looks like this - http://img.eautopartscatalog.com/live/O404570068OES.JPG

to test them, put an ohm meter across the two electrical leads.
Good - ~30ohms, Bad - open
They reside behind the heater controls, five in a row

I'd also be curious if you have an auxillery water pump

looks like this - http://img.eautopartscatalog.com/live/G305012429BOS.JPG

let me know if you have these parts and what your shipped prices are

Thanks!

I would take a #4 injector line if available.
Please email me at mike@transprintusa.com if available
Thanks
Mike

If you have them still.. I'd like a really cheap part, that should be simple to remove. The little white knobs (for removing the headlight bezel) behind the headlight fixtures. Should be 6 total.

My car is a 1984 300D Euro, and whoever converted the lights to the US Spec, used washers with nuts to attach the front bezel, making headlight replacement a REAL PITA. So uh, how much for the white thumbscrew things? Heck, they can probably be shipped regular US Mail

well i know im a little late to the party but i was wondering if you happen to have any functioning cruise control units on hand... or if you have anything at all

Hi:

Was wondering if you have the trim piece for the rear passenger side fender for a '77 300D.

Thanks

I need a w116 blower motor for my '80 300sd if you have one that will work- there are two different ones for the 116 so it may not.

John

Looking for a vacuum pump for the door locks on a diesel 124. Located under the rear seat. Also a blower motor for the heat/air locted under the wiper assembly.

Email me at jfikentscher@jerseyplanning.com . Thanks.

__________________
www.jerseyplanning.com
1987 300TD 440K - My car
2005 Jeep Grand Cherokee Laredo 107K - Tim's car
2000 - CLK320 100K - Deb's car
1994 C230 150K - Josh's Car