W-115 parts 72 and 76 - Page 2 - PeachParts Mercedes-Benz Forum

NC240D76 · #16 08-10-2006, 07:24 AM

d...benz-I will check for the rear light cover and get back to you later today.

dbn1066-I sent you an email

dbn1066 · #17 08-20-2006, 11:03 AM

Do you have the radiator/oil cooler from the 220D/ The engine/tranny? How about the grill, and is it the earlier metal mesh, or later type?
Dan
Also, Not sure I res'vd you e-mail of the 10th

NC240D76 · #18 08-20-2006, 11:36 PM

dbn1066- The 220 is mostly complete, engine and tranny,radiator and oil cooler still there, not sure what grill you are asking about. Got a picture?

Also kylepavao is still private messaging looking for map pockets in tan.

diametricalbenz- Your seat belt receivers should be arriving this week.

dbn1066 · #19 08-24-2006, 01:07 PM

The earlier style 115 grill has a stainless (I think) mesh behind the dividers like all other grills going back years. The new style 115 grill has a plastic, greyish thick mesh behind the dividers. Do you have a price for the radiator/oil cooler and grill?

NC240D76 · #20 09-03-2006, 07:53 AM

dbn sorry about the delay. Grill on the 220 is the same grey plastic as the 74 and 76 240d's. $10.00 for the radiator/oil cooler.

CSteve · #21 09-03-2006, 05:29 PM

Do you have an injection pump? I have a 74 240D
Also, how are the tail lights and headlights with assembly?

What about that bracket that holds the power steering pump in place?

Does the dash speaker work?

What about the gas pedal?

What about the knob for the parking break release?

Windshield?

Thought I'd ask about everything?

NC240D76 · #22 09-06-2006, 07:23 AM

Csteve- Both cars still have the injection pump, I have never removed one but I am sure I can figure it out.
I will have to check the lights on the 240 but the ones on the 220 (that I know are still there) are slightly different and I am not positive they will fit.
PS bracket should be there.
Buy a new speaker.
I should have at least one gas pedal.
Parking brake knob gone.
I have several windshields that are in good but not perfect condition but I had trouble finding anyone who wanted to install a used w115 windshield so when I put one in the 76 that I drive, I bought a new windshield, gasket and installation for less than $400. I will try to install the next one in the 74 since I have an extra gasket but it did not look like fun.

NC240D76 · #23 09-06-2006, 08:41 AM

Kip Foss - Visors are in sorry shape. What I did on the 76 I drive is walk through the junk yard until I found a set I liked (the shape and color in aprox the correct length), pulled the rods out of both the old visors out of the car and the junk yard visors, cut the rods about an inch past the bend and welded the new(junkyard) rod on the old (w115) base, after sliding the rod back into the new? visor the weld was hiding slightly inside the visor and the base mounted into the same holes and screw pattern. Be aware if you get fancy with lights, mirrors and double visors, it will add weight and you will need to modify the catch on the inside end of the visor to help support the extra weight.
I am fairly sure I have and extra set of seats or two and the arm rest should still be with them, these are in blue mtex. I have not removed the arm rest before, any hints?

62bhp · #24 09-07-2006, 12:15 AM

Do you have the front fog lights still the ones that i think bolt to the bumper?

NC240D76 · #25 09-09-2006, 12:28 AM

No fog lights on any of these cars.

62bhp · #26 09-09-2006, 03:33 AM

oh ok i must be referring to the regular lights that just bolt up to the frame. Not really familular with the 115's.

NC240D76 · #27 09-23-2006, 11:43 PM

bump

Tomit1 · #28 10-04-2006, 01:29 PM

hello,
would you have the radiator fan shroud (the protective plastic) for the 115.
e-mail me at tomi.toratti@luukku.com

Newguy · #29 10-09-2006, 05:41 PM

Ncnetman,
I am interested in the complete engine from the 220D.
Shipping may prove to be spendy?!?

How much for you to remove the engine and ship to me? - 80601

NC240D76 · #30 11-08-2006, 11:38 PM

I am fairly sure I have an extra shroud, I will try to check tomorrow.

I can ship the engine but I do not know how long it will take me to get to removing it, mid-dec at the earliest.