To all who read this I am looking for the hose set that mounts to the back of the compressor two big ones! and a small one from the drierto the condensor.new cost to much even if they are leaking I can rebuild them.thanks

If you haven't solved your problem yet take the old hose off..and take it to a local place that makes high pressure hydrolic hoses. They will use your hard fittings but make sure that you mark all the parts so that the ends are at the same relative angles as the original. Tell the shop making them to be aware of these angles and they will make it for you. Had the same hose made here for 38.00 us. Good luck.