K26 turbos FS, any interest?
 

Good morning, I soon will be upgrading the turbochargers on my 300sd's to Garrett 50 trim units so I will have 2 k26 units that will go up for sale and wanted to see if there was any interest on Peach parts for them before I list them on eBay . One is a standard compressor cover the other has the compressor bypass valve incorporated into the cover. They have been media blasted, ceramic-coated, and the compressor housing polished and clear ceramic coated. They are low mileage units with good bearings.

Let me know if there is any interest, I plan on changing them out in the next month for the Garrett units.

Below are pics of my 84 with the std K26 when I was fabricating the intake. https://uploads.tapatalk-cdn.com/201...f9212802f5.jpghttps://uploads.tapatalk-cdn.com/201...ab52923fe5.jpg

Sent from my SAMSUNG-SM-G870A using Tapatalk

Sent pm

These will bolt on stock 617.952 300D engines? They’re rebuilt?

Yes, rebuilt. 617 is the same turbo, I am not a hundred percent sure if it will fit yours, the Garrett wastegate actuator faces forward where is the k26 faces the frame.

Sent from my SAMSUNG-SM-G870A using Tapatalk

Just a couple more pictures of it on the engine, is ceramic coating has done a wonderful job preventing even the slightest bit of turbine and Center housing rust and the clear ceramic has kept the compressor housing looking pretty.

* I am open to reasonable offers however please don't lowball, we all know what these turbos are and offering $50 for one is laughable, I pay that much for ones at the junkyard, ones that have been overhauled, well, they are more expensive https://uploads.tapatalk-cdn.com/201...45dac3a92a.jpghttps://uploads.tapatalk-cdn.com/201...2469e3b1b7.jpghttps://uploads.tapatalk-cdn.com/201...bc860ed21b.jpg

Sent from my SAMSUNG-SM-G870A using Tapatalk

So, please forgive my lack of knowledge... but how would I determine if I could mount these on my w123, or, what modifications would be needed to be able to get it to install?

I think my current turbo is in need of some seals, and so this seems like a potential great opportunity to get a nice one in there!

Honestly, it should fit fine. If the compressor housing clears then the wastegate will as well. I only have experience with the w126 chassis, maybe one of the tech savy gurus could help here?

Sent from my SAMSUNG-SM-G870A using Tapatalk

Sending an email in a sec.

Well how much do u want for them?? $75?

It's like ebay, highest offer wins ;)


Sent from my SAMSUNG-SM-G870A using Tapatalk

This isn't ebay. A rule of this forum is price must be set by the seller

Can these be reclocked to align to the intake on a stock 617.952?

For you, 1000

All others..500

Sent from my SM-G892A using Tapatalk

Awaiting an answer on of the housing can be turned to align to my intake. Then I can offer you $75 :)

No, it isn't Ebay, Did you even read the post title, was gauging interest to see if it would even be worthwhile to list it. If you don't want it, move along.

Sent from my SM-G892A using Tapatalk