PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Mercedes-Benz Used Parts For Sale & Wanted (http://www.peachparts.com/shopforum/forumdisplay.php?f=8)
-   -   FS 240D Manual transmission steel (http://www.peachparts.com/shopforum/showthread.php?t=416585)

HughO 05-31-2022 12:13 PM

FS 240D Manual transmission steel
 
I have a 240D manual tranny for sale which I have had for 15 years or more.. Unknown miles or condition . I was told it was "OK". It likely came out of a 1977 if memory serves. model # 115261 1619614. I live in wyoming. local pickup would be best as the buyer could decide if it was good. I could drain the oil out to see if it comes out clean?
3072012109 or 699-2254 or respond in this forum. I am on a search for the aluminum 4 spd from 81 to 83.

Sugar Bear 05-31-2022 12:37 PM

Are the internals the same as what is needed to fix yours?

Frank Reiner 05-31-2022 01:37 PM

HO:
Although a direct replacement with an aluminum case box would be the simplest approach, the cast iron case version will bolt to the engine and mount also. Both were used in the 123 chassis and with the same engines.
The iron version would require a shifter to match. The shifters differ principally in the length of the arms.

garyd75 06-01-2022 06:34 AM

Shame you are so far. I've got the aluminum one as a spare. My Benz have the 2 speed iron box. Id love to swap so my spare trans is same as the ones in my car. Any chance you have a buddy in nc or heading down this way?

C.Doner 06-01-2022 10:13 AM

Quote:

Originally Posted by Sugar Bear (Post 4234219)
Are the internals the same as what is needed to fix yours?

They are different. For sure.

HughO 06-03-2022 11:16 AM

Quote:

Originally Posted by garyd75 (Post 4234449)
Shame you are so far. I've got the aluminum one as a spare. My Benz have the 2 speed iron box. Id love to swap so my spare trans is same as the ones in my car. Any chance you have a buddy in nc or heading down this way?


Well I pulled out the tranny yesterday & removed the drain plug.....no oil came out! I changed the oil about 8-10 yrs ago .Haven't checked since. Total knucklehead and shame on me. slow leak over a decade and I have only put 10K on it. The inside was full of shattered parts. so sad. The MT weighs 56 lbs and is 20x15 inches. 2 junk yards want to put one on a pallet and ship as freight and I can't dissuade them It would fit in a UPS/FedEx box, well stuffed and packed. It should ship for less than $100 to me I would think.

HughO 06-03-2022 11:25 AM

Quote:

Originally Posted by garyd75 (Post 4234449)
Shame you are so far. I've got the aluminum one as a spare. My Benz have the 2 speed iron box. Id love to swap so my spare trans is same as the ones in my car. Any chance you have a buddy in nc or heading down this way?


I weighed my aluminum transmission and it was 56 lbs and is 20X15" inches. It could be shipped fed ex. The steel one(the 115) feels more like 75 lbs but could still go UPS/FED EX I assume. I could pack it up if you wanted it . I found one in a junkyard back east and the UPS was about $100 as memory serves. A HD cardboard or plastic tote would work if well packed.

801mbz 06-03-2022 02:38 PM

Ouch I will check mine now before I go home


All times are GMT -4. The time now is 07:55 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website