|
|
|
|
|
#1
08-31-2004, 08:13 PM
|
||||
|
||||
|
What shocks can you put on a ML320
Are there a variety of shocks for the ML? I'm looking to see if there are different shocks that can be used to stiffen or soften the ride, are built for heaver loads, and so forth
Feedback is appreciated!
__________________
...Tracy '00 ML320 "Casper" '92 400E "Stella" 
|
|
#2
08-31-2004, 11:41 PM
|
|||
|
|||
|
I just put Bilstein shocks on the front of my '98. It made a huge difference in the handling and feel. It is a bit stiffer than I expected, but not bad. It rides more like a new truck than a luxury car. The original factory shocks I pulled out were completely shot.
|
|
#3
09-01-2004, 09:03 AM
|
||||
|
||||
|
Bilstein
I could only find one after market shock that would fit the back of the ML320.
Had to remove origional spring. but save several hundred dollars. Now have 2 new rear shocks origional equiptment in stock, i bought off ebay.
__________________
Steve Danville what i did myself. CPS rear shocks MAS x 3. SparkPlugs (twice) Fuel pump & Filter Window switch replaced both failed horns with Honda horns. Cleaned ERG Tube Oil changes Oil consumption Fix Brake Pads A/C Recharge Anti-Freeze change X 2. Front Shocks. Monroe. $90 Mercedes Warrenty Work: Harmonic balancer,power steering clamp. Cat converters.Drive Shaft Bearing.s Replaced Outer Lower Tie Rods and front lower ball joints at 156,000 miles
|
 |
| Bookmarks |
|
|
Linear Mode
