i searched and searched but couldnt find anything on this.

my wife has a 00 ML320. i installed eibach lowering springs on the rear, no problems. when i lowered the front with the torsion bars, it rides like crap. i only lowered it about an inch. are there bump stops up front and where are they? i think we are basicly riding on them. if so i think if i trim them it might be better. any other suggestions?

thank you for any help

can anybody help?

Try the ML forum. Gilly the moderator may be able to help...

__________________
2009 ML350 (106K) - Family vehicle
2001 CLK430 Cabriolet (80K) - Wife's car
2005 BMW 645CI (138K) - My daily driver
2016 Mustang (32K) - Daughter's car

On the front the bump stops are in the shock absorbers. THEY are made by Arvin here in the USA! You might need shorter shocks!

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator