![]() |
|
|
|
#1
|
|||
|
|||
![]()
Hi guys,
i want to replace my front and rear OEM shock absorbers with Bilsteins. i was having a hard time locating the stock sized springs for the rear as one of my old springs has cracked so that it couldn't be used anymore. i started looking at the aftermarket solutions and am currently interested in H&R springs + sway bars. i came across many posts on lowering the ML, but none of them mentioned this issue: i guess the geometry of the suspension will change due to using the shorter springs (-40 mm). so the question is will the oem end links fit fine or i need to look for a shorter links too? many thanks. |
#2
|
||||
|
||||
I have the rear set of spring/strut assembly that came out at 65k miles. It's sitting in my garage, if you want the spring, you can have them, just pay shipping cost. I don't have any tools to separate them, you will get the whole assembly.
__________________
![]() |
#3
|
|||
|
|||
![]()
hi supradupe,
sorry, i didn't mention i live in the UK so the shipping cost will be just the price of the units bought here. many thanks for your offer though ![]() |
![]() |
Bookmarks |
|
|