Quote:
Originally Posted by austent
Okay, there is the black box on the front of the pump that I sent off for assessing and rebuilding. The shop, usually reliable and trustworthy, gave this: C1401 indicates abs pump circuit. Power at the unit okay; applied direct power to pump, no operation. I am thinking they checked the plug in and there was power there, and then directly powered the black box on the front and got no power; after rebuild came back still getting same code even after 'clearing the computer', thoughts on this?
|
Verify that they unplugged the two pin connector that feeds the ABS pump motor and put power directly to the motor. If the motor doesn't run then it is just plain bad. Now if they put power to the black box from the ABS relay, and it doesn't get through to the motor, You have bad solder joints in the black box--see my ABS/ETS repair of this Search for jfreezn in this forum.
Regards,
Jim in Phoenix
11-19-2007, 12:07 AM
Threaded Mode
