Quote:
Originally Posted by BenzBob
Thanks for the information Sunedog! I looked at my inner door panel and have two questions.
Do you just pull out on the lower side if the inner panel to remove? Also, there are two plastic pins (one on each side of the top of the inner panel) that connect to the trim around the rear window...do these just pull out also?
Will be talking to Phil at Fastlane this week after the holiday to order the necessary parts.
|
Remove the inner door handle first, pull out the two pins on the sides and then you can start prying the rest of the inner panel off. You can use a dull putty knife to help get the pins out and the inner panel off. Order some of the plastic panel clips from Phil because you'll probably break some.
Take your time. I actually damaged a couple of the plastic clip holders on the inside of the inner panel. And I never could get the cap that covers the rear brake light to stay on. Finally had to silicone it on.
05-25-2008, 01:26 PM
Threaded Mode
