Been looking around the forum for help with removing the rear axle on my 1998 ML320. I need to remove the axle from the differential so I can have access to the driver side rear axle bearing that is going bad. If anybody would know how to remove the bearing and the axle I would appreciate any help you might be able to give

__________________
Gary

E320 1994
ML320 1998

Order W163 Service DVD at 800.for.merc

http://www.startekinfo.com/StarTek/outside/9124/?requestedDocId=9124

__________________
Kent Christensen
Albuquerque
'07 GL320CDI, '10 CL550. '01 Porsche Boxster
Two BMW motorcycles

Instead of removing the Axle, I took off the hub and had the old bearing pressed out and the new pressed in. Then I have to see if I have to have an alignment done on it.

__________________
Gary

E320 1994
ML320 1998