The starter solenoid is starting to hang up on the '97 CRV (4 cylinder) so I figured I would change the starter out. This was my first attempt at changing a starter on a Honda and was pleasantly surprised when I removed the old one. I had budgeted about an hour to remove it and it took all of about 15 minutes

. I was surprised at the simplicity of the removal.
The rubber boots at the ends of the cable are intact and still pliable. The small connector at the starter was a slip on connector and none of the plastic is broken or falls apart. The odo just turned over 200k miles and it drives/runs good. Even the cruise control still works.
Right now the rear windows don't work which I suspect is a regulator issue and the passenger side door check strap needs to be replaced. They get noisy just like the 123's

. It will be interesting to see how long the transmission will last.