Check engine light in on. Nothing seems amiss. All fluid levels good. No missing. No owners manual either. Its a 94 320e. So how do I get the check engine light off?

Granted this link is for an S500, but as far as the re-setting procedure, and a host of other useful information, you will find Jim's site useful.

http://pages.prodigy.net/jforgione/MB_S500.html

__________________
It is a truism that almost any sect, cult, or religion will legislate its creed into law if it acquires the political power to do so. Robert A. Heinlein


09 Jetta TDI
1985 300D

Read the codes and fix the problem.

What codes are coming up?

__________________
2006 CL500
1969 280SE
2023 Ram 1500
2026 Genesis GV70
2007 Tiara 3200

unscrew the lightbulb...

From Pelican Auto (I did this on my old OBDI Bimmer)

"To read codes for an OBD I car, you start by turning the ignition key on (do not start the engine) and pressing the gas pedal to the floor five times within a period of five seconds. If you proceeded correctly, then the check engine lamp will light on for five seconds, then blink off, then blink on for 2.5 seconds, and then go off for another 2.5 seconds. After this, the computer will start to show you the trouble fault codes that are stored."

"Auto Zone" will scan and reset the computer for you at no charge, or they have a scan tool for $60.

__________________
'07 Yukon 2500
'13 Subaru Outback 3.6R
'13 Orbea Carpe 9-speed

Currently Benzless
Formerly: 300TD, S600, E55, 560SEL

---= The forest breathes, listen.
-Native American elder