I found this article it was an interesting read. I thought the auto industry was volatile.

The part that got me was the best American bicycle is still made by a well known name the same way his great grandfather used to build them.


http://allanti.com/articles/where-was-my-bike-made-pg328.htm

__________________


Experience : what you receive 3 seconds after you really needed it !!



86 300SDL 387,000? Motor committed suicide
81 300SD 214,000 "new" 132,000 motor
83 300SD 212,000 parts car
83 300SD 147,000

91 F700 5.9 cummins 5spd eaton 298,000
66 AMC rambler American 2dr auto 108,000
95 Chevy 3/4 ton auto 160,000
03 Toyota 4runner 180,000 wifes

Hmm...never really thought about it! I'll have to go check my bike tomorrow. But I wouldn't be surprised if I found "made in China" somewhere.

Do you still ride your bicycle, soothappens? ^_^ I had a nice 5 mile drive a few weeks ago...well...it was nice until I got to the last mile...it was one of those hotter days...and I didn't have water with me...so I had to stop in the shade and rest for a while.

Maybe if my bike was made 60% in Spain it would have been a nicer ride than if it were made in China! Hahhaa. Again, I'll have to check it tomorrow.

__________________

Thanks for posting this. I never put any thought into where my Felt was manufactured. Always thought it was here in the US.

Now I know....




.

__________________
1983 123.133 California
- GreaseCar Veg System

I used to race off-road. I still get on it a lot. Used to put about 10,000 miles a year (no joke) but not I maybe put 1,000. My bike was made in Waterloo Wisconsin by hand, that much I know for sure! But the Shimano parts are all China

I have a couple of old 10 speeds, one is a Raleigh Tour de France, they are great on paved roads. Its a mile from the house to the letter box, often its easier to jump on the bike to check the mail.

__________________
Grumpy Old Diesel Owners Club group

I no longer question authority, I annoy authority. More effect, less effort....

1967 230-6 auto parts car. rust bucket.
1980 300D now parts car 800k miles
1984 300D 500k miles
1987 250td 160k miles English import
2001 jeep turbo diesel 130k miles
1998 jeep tdi ~ followed me home. Needs a turbo.
1968 Ford F750 truck. 6-354 diesel conversion.
Other toys ~J.D.,Cat & GM ~ mainly earth moving

I have several bikes.

My Klein was mostly made in America, frameset, bottom bracket, crank arms, handle bars. The chain rings, front and rear derailuers, shifters were made in Japan. Rims were made in France but the wheels were assembled here in America.

My Miyata Alumicross is completely made in Japan.

__________________
I'm sick of .sig files

I found a diamond back BMX frame for my son today. I thought it was an 80's model .....wrong made in Taiwan. That's how I found the article.

I grew up fixing up old Schwinn stingrays and the Schwinn phantom style bikes. I still collect bikes and that signature line would probably surpass the cars!
(to the wife's dismay )

The article was kind of sad like your childhood memories where sold off. After seeing that the GT & Diamond Back where no longer made in California and the reminder that Schwinn and mongoose where long ago sold off , It made me smile to see that the Schwinn name is still part of the #1 hand built bikes in America.

As for the riding , Not so much since I moved to Texas the land of two seasons hot and hotter.

My 8 year old girl still gets a chuckle seeing dad try and wheelie the stingray though !!

__________________


Experience : what you receive 3 seconds after you really needed it !!



86 300SDL 387,000? Motor committed suicide
81 300SD 214,000 "new" 132,000 motor
83 300SD 212,000 parts car
83 300SD 147,000

91 F700 5.9 cummins 5spd eaton 298,000
66 AMC rambler American 2dr auto 108,000
95 Chevy 3/4 ton auto 160,000
03 Toyota 4runner 180,000 wifes

Yes - I worked in a bike shop in the mid 1990's everything (despite the label) was made abroad. I managed however to buy one of the last Titanium Rayleigh mountain bike frames that were made in the UK. So I've got a nice retro rigid in the garage that should be used more frequently...

I wouldn't however be too upset by something being built in China or where ever. We bought a 3 wheeler box bicycle (bakfiets) here to carry our three small children about. The frame has been beautifully made out of aluminium but it was assembled by a useless bunch of Dutch monkeys who seem to concentrate harder on creating an image than actually making their products work. I had to rebuild it.

Good article. I am just getting back into cycling. Well, I can't say I was ever heavily into it. Also, I am just look at it as some form of exercise. I bought a Schwinn High Plains Mountain 21 speed bike at my R/C clubs garage sale. I paid $10 for it. I think this one was US made in AL in about '91. Shortly there after they moved production to Tiawan.
I think a lot of manufactures, shoes, furniture etc. are finding out they need some base manufacturing in the country they sell to. I think some of the New Balance shoes are made in the US. Also some assembled in the US with offshore (china) components.
Anyways, bought a helmut, pedals with toe clips, water bottle and a mirror. I've rode it a few times. I'm trying to get my legs conditioned and use to shifting. I'll probably get a better seat, next.
Tom

Me too -- my wife would say I'm addicted. I have a US Klein also; I'm building it up now. It'll be my first bike with brifters.

My Raleigh Super Record is a lugged steel frame -- one of the early Japanese-made Raleighs. I love it. It's converted to single speed for commuting duty, and it's smooth as silk. Couldn't be happier with it. I also have a Raleigh road bike I bought for my wife to ride, a Waterloo Trek touring bike, a Belgian city bike, a Specialized carbon fiber frame (that needs built-up), a Specialized Stump Jumper mtb, an old Centurion road frame, etc... Oh, and a host of leather saddles I have picked up here and there. Love the Brooks (and Brooks-style) saddles!

I just sold a Schwinn World Tour road bike (one of the Japanese models) that I found in the trash and fixed up a bit. It was a solid bike. Also just gave a friend a single speed conversion based on a Gitane (French) frame that was pretty nice.

__________________
1992 300D 2.5T
1980 Euro 300D (sadly, sold)
1998 Jetta TDI, 132K "Rudy"
1974 Triumph TR6
1999 Saab 9-5 wagon (wife's)

My frame wasn't listed. Its a Caloi (sp?) I have had it since 2002 with the parts being mostly shimano except a few bits and pieces brought over from my old GT timberline and Pacific.

__________________
1984 300SD Orient Red/ Palomino
1989 560SEC
2016 Mazda 6 6 speed manual
1995 Ford F-150 reg cab 4.9 5speed manual

Thats cool! Thanks for posting!

My road bike was made in Chattanooga TN. I actually took a tour of the plant back in 1997. After the plant tour and seeing how they test other bikes as well as their own. I was sold (Litespeed).

My Mountain bike was probably made in China though LOL! I don't care. It has always been a great bike. It is a dinosaur now anyway. Giant NRS1.

I have always been a fan of Serotta. But I never wanted to pay out $$$$ for the model I wanted.

Which reminds me.... I'm late for my morning ride!

__________________
AJ

1985 300D (SOLD)

The truth is that often items made in China, Taiwan, etc. are of better quality of those items made here or other countries. Labor is cheap so makers can spend more on the materials or equipment. And factory managers are often very strict. Sloppy works means lost contracts.

There was a time this was not all true, but China is the biggest manufacturing machine out there. I think were people still get hung up is that lets say a US built carbon bike cost $4,000 to purchase and the next year model was sent to China for production. That same bike will retail for the same if not more even though the cost to make dropped a significant amount.

I've got a relatively new Trek 520 touring bike. Welded steel frame which says "handmade in the U.S.A. Shimano components--bar end friction shifters, I hate those STI or whatever-they're-called shifters. Japanese made tires. We've also got two old (60's-70's) Shwinns--Typhoon and Hollywood, my Dad's and Aunt's when they were kids. Those are definitely U.S. made. After that, I don't know. We've got about 12 bikes total. I rode the 5 miles each way to school all the way through high school. I still try to ride, but not nearly as often now that schools over.

__________________
1983 240D 3.0T 4-speed manual, now sold

1989 Subaru GL Wagon 5-speed Touring Edition

I've always favored USA made bicycles. My last three - I don't go through so many - are: Schwinn Paramount, built in Waterford Wisconsin using Italian made tubing (Columbus SLX). Then a Spectrum Ti, built in Massachusetts by Merlin Metalworks (before Litespeed bought them). Most recently a Comotion built in Eugen Oregon. I've put 110 miles on the Comotion in the last 4 days. About due for a new bike, as I got the Comotion in 2000 or so.