Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > General Discussions > Off-Topic Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 12-17-2013, 07:17 PM
Posting since Jan 2000
 
Join Date: Sep 2011
Posts: 7,166
The Work After the Storm

We had a heavy ice storm that started Thursday the fifth. Power went out that evening at 8:30 and was out until about 4:30PM Sunday and then went out for another 12 hours or so about an hour and a half later.

The ice was loading the trees so heavily that it sounded like duck season with all the branches popping all over the place. There is still a little ice left in places even after a high of 67 this afternoon.

It knocked down the power line to my shop and left a huge mess. I did some cutting last Wednesday but there was so much ice in the downed branches, it was tough to deal with. I started cutting everything in lengths less than six feet so that it will fit in the front end loader and making piles where I could get at them with the tractor without tearing up the lawn too much. Once the ground dries out enough to support the tractor I'll start a burn pile out in the meadow.

I got the power line up for the shop this afternoon. The strain relief line was knocked down by a falling limb. Luckily I have a disconnect on it, so I was able to turn it off before they got the power back on, so that I could get to it later.

I got a lot more cut today. I'm probably halfway done with the clearing around the house, but taking care of limbs on the fences around the meadow and pastures will take awhile.

We had an ice storm that left us without power 13 years ago, so many people around here have backup generators. I am thinking about buying a welder/generator to try to be prepared for the next time.

I love living in the boonies, but there is sometimes an unexpected price for the peace, quiet and nature that we normally enjoy.

Reply With Quote
  #2  
Old 12-17-2013, 07:45 PM
kmaysob's Avatar
Registered User
 
Join Date: Nov 2003
Location: mesa az
Posts: 1,673
lincoln makes some really nice welder/generator combos. the sky is the limit as far as price goes. one of these days ill by a new engine driven welder.


if you really want a good unit, see if you can find one of the older sa-250 machines. diesel engine and a powerhead that will last forever
__________________
have no worries.....President Obama swears "If you like your gun, you can keep it
Reply With Quote
  #3  
Old 12-17-2013, 07:58 PM
Posting since Jan 2000
 
Join Date: Sep 2011
Posts: 7,166
I'd love to have an old SA. The DC generator makes DC with no ripple. The modern welders are alternators and rectifiers. Not quite as good to weld with.

The old SA's though, seem to be better welders than generators, and use LOTS of fuel. I've wanted a 225 Bobcat for a long time, but the price has gone up to about $3600 best case. I now have my eye on a Lincoln Ranger Eagle 10,000+. There's a local farm store that sells them for $2,999. It's a 225 Amp welder, 100% duty cycle at 210 Amps. Pretty hefty. Has one of the really good Kohler Industrial V twins too.

I keep thinking that I will find something on the used market that hasn't been used up, but who knows?
Reply With Quote
  #4  
Old 12-17-2013, 08:24 PM
Inna-propriate-da-vida
 
Join Date: May 2008
Posts: 1,969
Good luck with the clean up Larry. Ice storms are a PITA....
Our snowstorm of a few days ago dropped 4 inches of snow, then rained for a few hours, then dropped to teens and single digits....
Got everything cleared before it refroze, but it sure is a crunchy, slippery mess.
Kids love the indestructible sled run though, even if it is fast enough to send them into the creek....
__________________
On some nights I still believe that a car with the fuel gauge on empty can run about fifty more miles if you have the right music very loud on the radio. - HST

1983 300SD - 305000
1984 Toyota Landcruiser - 190000
1994 GMC Jimmy - 203000

https://media.giphy.com/media/X3nnss8PAj5aU/giphy.gif
Reply With Quote
  #5  
Old 12-17-2013, 08:28 PM
elchivito's Avatar
ĦAy Jodido!
 
Join Date: Aug 2009
Location: Rancho Disparates
Posts: 4,075
Quote:
Originally Posted by Air&Road View Post

I love living in the boonies, but there is sometimes an unexpected price for the peace, quiet and nature that we normally enjoy.
It comes with the territory. Glad you had no serious damage. In 2001 we had a flood here. The creek that crosses my property, which normally has a base flow of about 300cfs, crested at 22K cfs. I had no structures damaged as everything is well out of the flood plain, but my all my fences along the creek were toast, the property was littered with other peoples' stuff including propane tanks, dead cattle, outdoor furniture, an entire deck off somebody's house, you name it. Worst thing was we had an irrigation intake built into the creek that was grandfathered, and it blew out completely. I'm not allowed to replace it under the protected status of the creek. I now have to use a pump to pull my water rights out of the creek and into my ditch.
__________________
You're a daisy if you do.
__________________________________
84 Euro 240D 4spd. 220.5k sold
04 Honda Element AWD
1985 F150 XLT 4x4, 351W with 270k miles, hay hauler
1997 Suzuki Sidekick 4x4
1993 Toyota 4wd Pickup 226K and counting
Reply With Quote
  #6  
Old 12-17-2013, 08:44 PM
kmaysob's Avatar
Registered User
 
Join Date: Nov 2003
Location: mesa az
Posts: 1,673
Quote:
Originally Posted by elchivito View Post
It comes with the territory. Glad you had no serious damage. In 2001 we had a flood here. The creek that crosses my property, which normally has a base flow of about 300cfs, crested at 22K cfs. I had no structures damaged as everything is well out of the flood plain, but my all my fences along the creek were toast, the property was littered with other peoples' stuff including propane tanks, dead cattle, outdoor furniture, an entire deck off somebody's house, you name it. Worst thing was we had an irrigation intake built into the creek that was grandfathered, and it blew out completely. I'm not allowed to replace it under the protected status of the creek. I now have to use a pump to pull my water rights out of the creek and into my ditch.
what part of az are you in? almost sounds like the flood that blew through tuba a few years back
__________________
have no worries.....President Obama swears "If you like your gun, you can keep it
Reply With Quote
  #7  
Old 12-18-2013, 07:22 AM
Posting since Jan 2000
 
Join Date: Sep 2011
Posts: 7,166
Quote:
Originally Posted by elchivito View Post
It comes with the territory. Glad you had no serious damage. In 2001 we had a flood here. The creek that crosses my property, which normally has a base flow of about 300cfs, crested at 22K cfs. I had no structures damaged as everything is well out of the flood plain, but my all my fences along the creek were toast, the property was littered with other peoples' stuff including propane tanks, dead cattle, outdoor furniture, an entire deck off somebody's house, you name it. Worst thing was we had an irrigation intake built into the creek that was grandfathered, and it blew out completely. I'm not allowed to replace it under the protected status of the creek. I now have to use a pump to pull my water rights out of the creek and into my ditch.
Wow. That sounds way, WAY worse than what I'm dealing with. After I get all the limbs hauled off and burned, the only thing left behind will be ugly trees. Another couple of days work and then some time once the ground is dry enough that the tractor won't tear it up, and it'll pretty much be history, at least around the house, barn and shop.

The work along the fence rows will be ongoing, but keeping the fence up is just part of everyday life around here anyway.
Reply With Quote
  #8  
Old 12-18-2013, 07:40 AM
SwampYankee's Avatar
New England Hick
 
Join Date: Sep 2006
Location: CT
Posts: 1,501
Glad to hear you were relatively unscathed, Larry! Sounds like a good excuse for a big ol' bonfire party to me.
__________________

1980 300TD-China Blue/Blue MBTex-2nd Owner, 107K (Alt Blau) OBK #15
'06 Chevy Tahoe Z71 (for the wife & 4 kids, current mule) '03 Honda Odyssey (son #1's ride, reluctantly) '99 GMC Suburban (255K+ miles, semi-retired mule) 21' SeaRay Seville (summer escape pod)
Reply With Quote
  #9  
Old 12-18-2013, 04:14 PM
Posting since Jan 2000
 
Join Date: Sep 2011
Posts: 7,166
Yeah, the burn pile is going to be huge and it is turning into more work than I thought. I have most of it cut now though. I can't just push most of it out to the burn pile because there is a gate that's too narrow. In front of the house I'm trying not to tear up the lawn too bad with the tractor.

We have rain coming the next few days, so this project is going to drag out.
Reply With Quote
  #10  
Old 12-18-2013, 06:18 PM
Registered User
 
Join Date: Oct 2012
Posts: 22,037
Quote:
Originally Posted by Air&Road View Post
I'd love to have an old SA. The DC generator makes DC with no ripple. The modern welders are alternators and rectifiers. Not quite as good to weld with.

The old SA's though, seem to be better welders than generators, and use LOTS of fuel. I've wanted a 225 Bobcat for a long time, but the price has gone up to about $3600 best case. I now have my eye on a Lincoln Ranger Eagle 10,000+. There's a local farm store that sells them for $2,999. It's a 225 Amp welder, 100% duty cycle at 210 Amps. Pretty hefty. Has one of the really good Kohler Industrial V twins too.

I keep thinking that I will find something on the used market that hasn't been used up, but who knows?
Keep an eye out on Govliquidation.com. They have a disposal in Hooks, Texas, which was once known as the Red River Arsenal. Generators of all types come up for sale there, but the usual ones listed are the bigger ones.

They sometimes have some generators that come up that use VW flat four air cooled engines and are built into a frame that allows them to be carried by four or six people. I think these also offer pull starters.

They also get welders in from time to time.
Reply With Quote
  #11  
Old 12-18-2013, 06:41 PM
Posting since Jan 2000
 
Join Date: Sep 2011
Posts: 7,166
Thanks Idle. I'm vaguely familiar with the army depot over there but not aware of the website. I will keep an eye on it. Thanks.
Reply With Quote
  #12  
Old 12-18-2013, 06:48 PM
elchivito's Avatar
ĦAy Jodido!
 
Join Date: Aug 2009
Location: Rancho Disparates
Posts: 4,075
Quote:
Originally Posted by kmaysob View Post
what part of az are you in? almost sounds like the flood that blew through tuba a few years back
Interesting coincidence. I lived near TC a long time ago. My inlaws are from a village near there. I know the flood you're talking about. Moencopi Wash broke it's banks and caused some havoc. A buddy of mine put his kayak into Moencopi Wash where it crosses highway 160 east during that flood and boated the wash all the way to the Little Colorado confluence.
My flood was on Spring Creek, which feeds Oak Creek in the Verde Valley. The Verde that year went from a base flow of about 600cfs to nearly 50K. Our biggest flood was in the winter of 93. All the dams on the Oak Creek > Verde> Salt> Gila> Colorado system were breached at one point. A bunch of us, drinking beer and looking at maps one night during that flood figured out that it was theoretically possible, for the first time in a VERY long time, to put kayaks into Oak Creek at Sedona and boat all the way to the Sea of Cortez, with only a few portages around key dams.
__________________
You're a daisy if you do.
__________________________________
84 Euro 240D 4spd. 220.5k sold
04 Honda Element AWD
1985 F150 XLT 4x4, 351W with 270k miles, hay hauler
1997 Suzuki Sidekick 4x4
1993 Toyota 4wd Pickup 226K and counting
Reply With Quote
  #13  
Old 12-18-2013, 07:15 PM
Registered User
 
Join Date: Aug 2001
Location: Milford, DE
Posts: 1,558
Quote:
Originally Posted by Air&Road View Post
Thanks Idle. I'm vaguely familiar with the army depot over there but not aware of the website. I will keep an eye on it. Thanks.
I bought a military MEP-002a for backup power, you can find them in running condition for $1,200-$1,500. For the money nothing else even comes close although its not set up for end-user welding. PTO generators are also great for those with tractors.

Do a google search on Mep-002 if you're interested, lots of info on the web.
__________________
98 Dodge-Cummins pickup (123k)
13 GLK250 (135k)
06 E320CDI (323K)
16 C300 (62K)
82 300GD Gelaendewagen (54K)
Reply With Quote
  #14  
Old 12-18-2013, 08:00 PM
Registered User
 
Join Date: Oct 2012
Posts: 22,037
Once you buy you have a few days to pick stuff up, but beware: They normally offer NO help in loading. You would think they would have a forklift or two sitting around somewhere but if they do they will not allow it to be used to load up a purchase.

Government Surplus Auctions at Government Liquidation
Reply With Quote
  #15  
Old 12-20-2013, 10:04 PM
Jim B.'s Avatar
Who's flying this thing ?
 
Join Date: May 2006
Location: N. California./ N. Nevada
Posts: 3,611
Smile

"No permitas NADIE te hagas sentir que no mereces lo que quieres"

__________________
1991 560 SEC AMG, 199k <---- 300 hp 10:1 ECE euro HV ...

1995 E 420, 170k "The Red Plum" (sold)

2015 BMW 535i xdrive awd Stage 1 DINAN, 6k, <----364 hp

1967 Mercury Cougar, 49k

2013 Jaguar XF, 20k <----340 hp Supercharged, All Wheel Drive (sold)
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 11:48 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page