|
|
|
#1
|
|||
|
|||
question to the techies
I am going to have my car worked on over the summer.. actually soon, since I am leaving for Europe for a while. I am leaving my car with the tech and he will be doing work. I have noted every single thing, big or small that I would like fixed or replaced. Here is a list of things I will ask my tech to check or fix:
Driver inner door lock replacement Driver door (needs more pull than other doors)--lubrication? Passenger door missing a screw on the door Antenna mast replacement front passenger head rest button broke (replace) seatbelt for front passenger needs to be reversed front passenger door side skirt (corner sticking out) All four windows (replace switches & front regulator) Engine cleaning replace all filters replace zebrano wood console with a better one (if possible) A/C work Bumper *replace front with a SEC bumper* Fuel pump redplacement Brake rotors replaced Power doorlocks check to see if timing chain is OK My question is.. by looking at this list, what sort of price would one expect to pay to have all this done? Is this roughly a $2000 job? more? less? Some things.. such as replacing the bumper with an SEC and/or engine cleaning would be a biggie.. and I have no idea how much that would cost. I would just like to be familiar with a price range. thanks |
#2
|
||||
|
||||
Never heard of a coupe front bumper on a sedan....
Gilly
__________________
Click here to see the items I have up for auction at EBay Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold) |
#3
|
|||
|
|||
Gillybenztech.. the owner of this fine car put on a SEC bumper on his SEL. |
#4
|
||||
|
||||
Well I figure for you parts would come in probably at $1000 if not more.
Labor is where you are going to pay the most. You should try to calculate the time for each repair and the parts cost for each repair to get your estimate.. Alon
__________________
'92 300CE - Sold 2004 C240 - 744 - C7 Wheels - Android Radio 2002 C320 - 816 - Sport Wagon |
#5
|
||||
|
||||
Snibble I must say that is one of the nicest looking 126's I have ever seen. Do you happen to know who owns it or anything about it?
__________________
88 300E 03 911 C4S 2008 Triumph Speed Triple My pics --> www.BrettAdamsDesign.com |
#6
|
|||
|
|||
yes.... he's user "420" on the forum and lives in Kentucky.
I also agree that is a nice w126 |
#7
|
|||
|
|||
Very nice! I asked about doing that about 2 years ago and nobody had an awnser.
|
#8
|
||||
|
||||
I've looked at it and looked at it, and to be honest, it just doesn't "do anything" for me personally, I think I like it better like it was. Looks out of place somehow. Maybe I'm a purist or something, I didn't really consider myself one though. I wonder how the gaps are when you see it in person.
Gilly
__________________
Click here to see the items I have up for auction at EBay Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold) |
#9
|
|||
|
|||
That's teh first thing that my eye notices for some reason
|
#10
|
|||
|
|||
what do you guys mean by "gap" in the bumper?
|
#11
|
||||
|
||||
What I mean by gaps is that the SEC has a different hood, fenders and headlights than a SE or SEL. I would think that because of this, the top of the bumper would have a different shape between these 2 models so that the bumper would have a matching contour and have an even gap between the bumper and these other parts. My concern would be that a bumper from an SEC would not match the grille, headlights and fenders, the gaps between the parts wouldn't look right. I can't tell very well just from the picture you posted.
In general, and this is only my opinion, even if the gaps were correct, which I doubt, it just doesn't look "right". Gilly
__________________
Click here to see the items I have up for auction at EBay Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold) |
#12
|
|||
|
|||
Ahhhhh... i get it. I will ask 420 if he has gaps. I didn't think about that till now.
|
#13
|
||||
|
||||
Ah ha!....After finding this thread, looking closer at the pic's of my car I think I see where the gap concerns are coming from. Are you guys talking about the gap between the headlight bezels, the grille & the bumper?
If that’s what it is, I think the dark paint of my car is reflecting in the chrome on the bumper and making it appear that there is a large gap there. I didn’t really notice it in the pic’s because I see my car in person all the time. Anyway, I measured 3/8” of a gap from corner to corner between the bumper, bezels & grille. Gilly, I went over the installation a little more in-depth in a different thread….In case you haven’t seen it yet, here’s the jist of what I did……I used my SEL’s existing chrome & bumper support with the SEC bumper cover. The contours would be all wrong otherwise like you said and I wouldn’t be able to close my hood either. Snibble, could you measure the gap on your car for comparisons sake?
__________________
73 220D 08 997 C2S 03 Jetta wagon TDi |
#14
|
|||
|
|||
420... I measured 1cm.
|
Bookmarks |
|
|