PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   2 out of 6 (http://www.peachparts.com/shopforum/showthread.php?t=101384)

mikesudz 08-14-2004 11:42 AM

2 out of 6
 
Hello,

The other day I made a left hand turn at a traffic lite and my 1998 ML 320 started running it seems on 2 cylnders. There is no power and a strange sound from engine like a gurgling noise. The yellow check engine lite also came on at the same time. I have about 86k on car but it has always run great. I got home ok and checked it the next morning, lite still on but ran ok till it warmed up then lost power etc. I called the dealer who said something about a sensor and bring money. Is there anything I can check or do about this myself?

Mike

stevebfl 08-14-2004 11:49 AM

Is it running well now?

Does it run well above 4000rpms with the pedal to the metal?

Look at your air filter to intake ducting. Get the codes read.

mikesudz 08-14-2004 12:07 PM

Hi Steve,

No it doesn't run well now. I haven't tried the 4000 rpm idea but I will right now. I looked at the air filter it is dusty and needs replacing.

I don't know what get reads means.

Mike

stevebfl 08-14-2004 12:21 PM

If it doesn't run well then DON'T bother with the 4000rpm test. That was meant for a engine that seemed good otherwise. It would indicate fueling capacity. If you aren't running properly the codes need to be read and maybe the fuel pressure tested.

mikesudz 08-14-2004 12:29 PM

Ok, I couldn't get up to 4000 rpm. Would you tell me how to read the codes? Is that something I can do?

Thanx,
Mike

stevebfl 08-14-2004 12:48 PM

Autozone in some areas does this, although I can't suggest driving the car if it isn't running properly.

Some parts stores will loan a code reader, but the proper answer is to have a professional look at it. BTW I don't consider AZ to be a professional.

mikesudz 08-14-2004 01:01 PM

Thanx, Steve I will call around to see who has a code reader. If it's ok after I get that done I will let you know results.

Thanx,
Mike


All times are GMT -4. The time now is 02:17 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website