 
         
		
					|   | 
 | 
 | 
| 
 | 
|  | 
| 
			 
			#1  
			
			
			
			
			
		 | |||
| 
 | |||
| 
				
				2 out of 6
			 
			
			Hello, The other day I made a left hand turn at a traffic lite and my 1998 ML 320 started running it seems on 2 cylnders. There is no power and a strange sound from engine like a gurgling noise. The yellow check engine lite also came on at the same time. I have about 86k on car but it has always run great. I got home ok and checked it the next morning, lite still on but ran ok till it warmed up then lost power etc. I called the dealer who said something about a sensor and bring money. Is there anything I can check or do about this myself? Mike | 
| 
			 
			#2  
			
			
			
			
			
		 | |||
| 
 | |||
| 
			
			Is it running well now? Does it run well above 4000rpms with the pedal to the metal? Look at your air filter to intake ducting. Get the codes read. 
				__________________ Steve Brotherton Continental Imports Gainesville FL Bosch Master, ASE Master, L1 33 years MB technician | 
| 
			 
			#3  
			
			
			
			
			
		 | |||
| 
 | |||
| 
			
			Hi Steve, No it doesn't run well now. I haven't tried the 4000 rpm idea but I will right now. I looked at the air filter it is dusty and needs replacing. I don't know what get reads means. Mike | 
| 
			 
			#4  
			
			
			
			
			
		 | |||
| 
 | |||
| 
			
			If it doesn't run well then DON'T bother with the 4000rpm test.  That was meant for a engine that seemed good otherwise.  It would indicate fueling capacity.  If you aren't running properly the codes need to be read and maybe the fuel pressure tested.
			
				
			
		 
				__________________ Steve Brotherton Continental Imports Gainesville FL Bosch Master, ASE Master, L1 33 years MB technician | 
| 
			 
			#5  
			
			
			
			
			
		 | |||
| 
 | |||
| 
			
			Ok,  I couldn't get up to 4000 rpm.  Would you tell me how to read the codes?  Is that something I can do? Thanx, Mike | 
| 
			 
			#6  
			
			
			
			
			
		 | |||
| 
 | |||
| 
			
			Autozone in some areas does this, although I can't suggest driving the car if it isn't running properly.   Some parts stores will loan a code reader, but the proper answer is to have a professional look at it. BTW I don't consider AZ to be a professional. 
				__________________ Steve Brotherton Continental Imports Gainesville FL Bosch Master, ASE Master, L1 33 years MB technician | 
| 
			 
			#7  
			
			
			
			
			
		 | |||
| 
 | |||
| 
			
			Thanx, Steve I will call around to see who has a code reader.  If it's ok after I get that done I will let you know results. Thanx, Mike | 
|  | 
| Bookmarks | 
| 
 |  |