The turn signals (left and right) in my 95 E320 stop working. Before it completely go dead, it work for a few days, and then when I am ready to work on it, it works again. This time it completely goes dead. When I turn signal left or right, no thing happens. When the turn signal does not work, the hazard lights and the intermittent wiper also do not work. I turn on and off the hazard switch several time, but the turn signal and hazard light completely go dead. Reading the forum, I suspect the Combination Relay N10 is bad. The problem is the same as Waynesworld's problem in his 90 300SL. Gilly did provide him with a good testing procedure, but this procedure does not work on my E320 because the N10 in my car have only 16 pin connector (5 big one and several small ones) not 19 as described in Waynesworld's car. Does anyone have a schematic diagram for turn signal for 1995 E320 and how to test this relay, please help me how to diagnos the relay N10 problem before I go out and spend few hundreds dollars for this relay. I hate to buy the new relay and later find out that it is not the relay problem. I have the MB CDs but these CD do not help. They do not have a schematic for turn signal.

Gilly, if you read this forum, could you tell me how to test the combination N10 relay in E320.

Thanks