|
|
|
#1
|
|||
|
|||
arghh! sunvisor clip BROKE
car is a 1990 190E, driver-side visor clip broke off today! it seems that it broke at where the screw is placed. what is the part number for this piece? and does the dealership or fastlane even carry this piece? never would I think a m-b visor clip would just break off. it's actually a brittle piece of plastic. man, I'm just bummed out about this because now my visor just sags. has anyone replaced one? was it easy? please help!
|
#2
|
|||
|
|||
These people have your visor clip,call them tuesday -1-800-243-1220 it's cheap.Installing it may be a ittle bit difficult,being that the screwis recessed in the clip itself.I put mine on with two-part,5 minute expoxy ,worked fine for me.Yeah I know how irritating that sagging visor is
|
#3
|
|||
|
|||
thanks, ellerbrook. can you tell me what company I will be calling and what it will cost. I just don't want to be thrown off gaurd if the price for this piece is $$$!
|
#4
|
|||
|
|||
Company
It's called performance products they're in L.A.S&H may be more than the part,but maybe you can use some of their other parts,I think it was about 3bucks for 2 of them
|
#5
|
||||
|
||||
Several on eBay today.
__________________
Norm in NJ Next oil change at 230,000miles |
#6
|
|||
|
|||
I would call the dealer first as I only paid about $5 from my local dealer.....no shipping. If you have a philips screwdriver you can install the clip before you leave the dealer parking lot. Just make sure not to bridge the two contacts as one is 12V+ and the other is ground.
|
#7
|
||||
|
||||
You're going to find that many interior parts are available unlike some cars. MB also uses many of the same parts across car lines and for many years. The door lock knob is a case in point. They have been using that same part at least since the 60's. Check out a fintail, for instance.
BTW, the visor clip was already broken on my 300SE what I bought it. I went to the dealer and got it.
__________________
Regards Warren Currently 1965 220Sb, 2002 FORD Crown Vic Police Interceptor Had 1965 220SEb, 1967 230S, 280SE 4.5, 300SE (W126), 420SEL ENTER > = (HP RPN) Not part of the in-crowd since 1952. |
#8
|
|||
|
|||
When mine broke, I made one w/an aluminum plate for free. It'll never break again in my lifetime.
__________________
JR 1986 Gold 300E 4Dr automatic |
Bookmarks |
|
|