|
|
|
|
|
|
|
|
#1
|
|||
|
|||
|
I found the problem. When I was checking the engine compartment for a short, I touched the OVP and felt that it was too warm, hot even. Even though I had replaced the OVP a while back when I was trouble shooting another problem. I pulled the OVP and found that it was full of water and corroded badly. Luckily, I had not thrown the old OVP away. I reinstalled it and the light went out and all works well. Side benefit is that the car now starts on the first rev. This is a inherent problem with this model as I have seen in it other posts. Water seems to drain directly on the top of the OVP. I suggest covering it with some tape or plastic to keep it dry.
|
![]() |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Check Engine Light (93 300E 3.2L) | carkahlua | Tech Help | 4 | 09-22-2003 04:25 PM |
| Check Engine Light re-visited | roadsession | ML, GL, G-Wagen, R-Class, Unimog, Sprinter | 12 | 08-07-2003 12:25 PM |
| 'Check Engine' Light will not come on | tr4me | Tech Help | 5 | 04-25-2003 11:57 AM |
| Check Engine Light M103 | d2bernhard | Tech Help | 2 | 01-15-2003 03:37 PM |
| 420 SEL - Check Engine Light Codes Needed. | rsamson830 | Tech Help | 1 | 10-30-2001 08:34 PM |