|
|
|
|
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
How do I remove the center console to replace the rearview and side mirror switch for a 1993 400SEL?
|
#2
|
|||
|
|||
Tools needed; right angle bit driver, torx t25 bit, & #2 phillips bit. If you have these then the switch can be replaced in 25-30 minutes. The wood trim on the ash-tray must come off first. And the plastic trim around gearshift. Then you will need rt/angle driver w/T25 bit to remove 2 bolts that hold the 2 pieces of wood together. You get to them thru area by ashtray wood was removed.
|
Bookmarks |
|
|