|
|
|
|
|
|
#1
|
|||
|
|||
|
water pump
Anyone done a water pump on a 95 s320, my brother inlaws is shot, I want to help him but need some imput as I've never done one on this car. any advise would be great. steve 83sd
|
|
#2
|
|||
|
|||
|
Do a search on Water Pump 124. Many results. One thread states that this is a "Bear" of a job, book time 6 hours.
I have not done this job, but know that there is a Snap-on extension with flexible 13mm? socket, that speeds the job. There will be disagreement on this, but when I had a new pump put on my '92 124, I went with the Factory pump. Did this because of the 1 year warranty issue and the possibility that aftermarket design might not equal factory performance. I had a pump done on my previous, '90 124. On this car, they had to also do the Belt Tensioner. Steve |
|
#3
|
||||
|
||||
|
Quote:
__________________
'91 300-SEL |
|
#4
|
|||
|
|||
|
guys, I'm confused, I thought the s320 was a 140, Is the pump on a 124 the same? steve 83sd
|
|
#5
|
||||
|
||||
|
The engines would be the same....just the chassis number is different.
For example: Both the 126(S-Class) and the 123 (the equivalent of today's E-Class) chassis used a 617.95x motor. Open the hood on either one of the same year, and with some very minor differences, it is the same thing.
__________________
It is a truism that almost any sect, cult, or religion will legislate its creed into law if it acquires the political power to do so. Robert A. Heinlein 09 Jetta TDI 1985 300D |
|
#6
|
|||
|
|||
|
Guys, thanks for the help. steve 83sd
|
|
#7
|
|||
|
|||
|
The Snap On extension that eases this job greatly is FLXM13. It costs $50, but will save lots of trouble. The shaft is only 1/4" so it will feel like you are going to twist the shaft in two, but just keep torquing on it.
Since the job is so labor intensive, you DEFINITELY want to use a quality pump. Also buy the short piece of hose at the top of the pump and the thermostat, then cut away the old one to ease getting the pump out. Good luck, |
|
#8
|
|||
|
|||
|
thank you for your help. steve 83sd
|
![]() |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Theoretical question regarding water pump wear… | RunningTooHot | Tech Help | 2 | 10-09-2003 10:46 AM |
| Water pump installation on M127 engine | Gregg Bambo Jr | Vintage Mercedes Forum | 2 | 01-28-2003 11:56 AM |
| Can you rebuilt Auxillary Water Pump. | MVK | Diesel Discussion | 10 | 09-20-2002 01:29 AM |
| Water Pump Success! | Mr. BILL | Tech Help | 0 | 02-28-2002 12:29 AM |
| aux. water pump & mono valve questions | TheLaw | Tech Help | 1 | 08-23-2001 11:01 PM |