I started my car and warm it up for about five minutes and
when I pulled off it went dead . And when you try to start it up again it would not start,it not firing what could be the problem . Can someone please tell me what to do about this problem . BCM494 thats you for all your help .The car is a 1985 and is a 380SE. I am sorry that I did not give all the info but it happens sometime .
No it has not started sense that time. But I got a part and I have a question about it. What does it mean about (+) pin 1 (-) pin 5 = greater than 5 ohms . We have got a control unit , Idle . I hope that this is enough information on this .

[Edited by bcm494 on 12-23-2000 at 03:29 PM]

Maybe its the kneuter valve.
 

Seriously, you might want to tell everyone what year and model your car is, before someone tells you that you need a new muffler bearing. :D

What did you "pull off"? Maybe if you "put it back on", the car will run. You sound like the people who "turn their car over". I did that once on a '54 Desoto and it broke the windshield and severely dented the roof.

Seriously, you have to give a much better description of your problem for anyone to help.

P E H

Have you been able to start it since?