|
|
|
#1
|
|||
|
|||
82 380 SEC No Start
I am experiencing a no start situation with a 1982 380 SEC. The fuel pressure at the pump is about 75psi. The pressure at the control point (top of the fuel distributor) is bout 15psi. However, it appears fuel does not get to the injectors enough. I disconnected frequency valve, but still no start. Check for power at the frequency valve, but could only see ground.
There is adequate sparks from the ignition. Plugs are not fouled nor do I see any indication of running lean. Any idea? Thanks Franc Last edited by Franc; 04-20-2005 at 01:42 PM. |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
380 SEL cranks, has spark will not start | 73cudaproject | Tech Help | 5 | 12-09-2004 10:43 AM |
Where to begin ? Car doesn't start (doesn't turn over) | renyf1 | Tech Help | 23 | 06-22-2004 11:29 AM |
1983 380 SEC Manual/CD advice | gedeonbgjr | Tech Help | 0 | 05-14-2003 04:52 PM |
380 SEC advice on purchasing | gedeonbgjr | Tech Help | 4 | 04-27-2003 01:24 AM |
Sequence to start a M104 | atamians | Tech Help | 1 | 01-17-2003 04:26 PM |