NEED HELP QUICK, how to remove headlight from w124
 

the black fastener up top, how do you remove that?
where are the other screws?

thanks

What are you trying to do?

Remove the plastic fastener on the top by
turning 1/4 turn CCW, then lift out.
Remove the narrow trim panel or alternately
just remove the inboard screw and bend it
out of the way to expose fasteners on the
bottom of the light assembly. You must
unclip and pop out the corner light assembly
to reveal the last fastener holding the assembly.

Darrell

installing eurolamps..
:rolleyes:

I got depo euros, did not come with bulbs.
Just want to make sure, It's H4 55W bulbs right?

Search, Mon. Search. Beaucoup info. available to those who search for it.

I've got a gap below the driver side headlight and the bumper..even with the rubber guard from the old headlights..what do I do??

Stuck at this point. I dont see or have any idea where this clip is.

Reach into where the turn signal is, and near where the wiring plug connects is a tab. Push out (or squeeze in?) on the tab while pushing the turn signal straight out. Very easy.