the black fastener up top, how do you remove that?
where are the other screws?

thanks

__________________
87' 300E champagne - Euro headlights and corners, 8-hole rims, 140,000miles/220,00km.

What are you trying to do?

__________________
'95 E300 Diesel, 264,000 Miles. [Sold it]

installing eurolamps..

__________________
87' 300E champagne - Euro headlights and corners, 8-hole rims, 140,000miles/220,00km.

I got depo euros, did not come with bulbs.
Just want to make sure, It's H4 55W bulbs right?

__________________
87' 300E champagne - Euro headlights and corners, 8-hole rims, 140,000miles/220,00km.

Search, Mon. Search. Beaucoup info. available to those who search for it.

__________________
Norm in NJ
Next oil change at 230,000miles

I've got a gap below the driver side headlight and the bumper..even with the rubber guard from the old headlights..what do I do??

__________________
87' 300E champagne - Euro headlights and corners, 8-hole rims, 140,000miles/220,00km.

Remove the plastic fastener on the top by
turning 1/4 turn CCW, then lift out.
Remove the narrow trim panel or alternately
just remove the inboard screw and bend it
out of the way to expose fasteners on the
bottom of the light assembly. You must
unclip and pop out the corner light assembly
to reveal the last fastener holding the assembly.

Darrell

Stuck at this point. I dont see or have any idea where this clip is.

__________________
85 300D 3 pedal. Current project.
83 300TD (need rear wiper assembly dead or alive)
84 300SD Daily driver
85 300TD almost 400k miles and driven daily.
98 E300D *sold
86 300SDL *sold and made flawless 10 hour journey to new home.

Reach into where the turn signal is, and near where the wiring plug connects is a tab. Push out (or squeeze in?) on the tab while pushing the turn signal straight out. Very easy.

__________________
http://i193.photobucket.com/albums/z...-RESIZED-1.jpg
1991 300E - 212K and rising fast...