|
|
|
#1
|
|||
|
|||
How do you adjust steering wheel position
Need some help on adjusting my steering wheel. It is about 5 deg off center. There appears to be a collar with an allen head adjustment on the column. Would this be what you loosen to make the adjustment????
126 model
__________________
1985 280SE |
#2
|
|||
|
|||
alignment
Hi If your steering wheel is off you do not just remove it from the shaft and center it or you can off set the signal cancel and be in a turn as far as the pressure valve in the box is concerned.The correct way is to remove the 12mm bolt on the box and insert a centering bolt thru and see were the steering wheel is if off then some were between the out put shaft of the box and the steering post were the wheel is bolted to is off,also with the centering bolt in the box that is when your tech should set the toe.joeym
|
#3
|
||||
|
||||
your tie rod ends need to be set correctly....someone alighned the car without looking at the wheel position.
__________________
Proud owner of .... 1971 280SE W108 1979 300SD W116 1983 300D W123 1975 Ironhead Sportster chopper 1987 GMC 3/4 ton 4X4 Diesel 1989 Honda Civic (Heavily modified) --------------------- Section 609 MVAC Certified --------------------- "He who fights with monsters might take care lest he thereby become a monster. And if you gaze for long into an abyss, the abyss gazes also into you." - Friedrich Nietzsche |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
W124 steering wheel upgrade - details & photos | gsxr | Mercedes-Benz Performance Paddock | 20 | 09-24-2010 06:39 PM |
99 E430 - steering wheel removal | pwells | Tech Help | 1 | 03-28-2004 06:14 PM |
Steering Wheel Option | Jon Hrut | Off-Topic Discussion | 1 | 01-26-2003 02:12 PM |
1986 300e steering wheel removal w/ airbag | 86 300e | Tech Help | 2 | 05-25-2002 02:00 PM |
steering offset geometry | bobbyv | Mercedes-Benz Wheels & Tires | 0 | 08-19-1999 09:20 PM |