outside temp display - PeachParts Mercedes-Benz Forum

aqua190 · #1 06-20-2005, 05:58 PM

can anyone tell me how to remove the outside temp display from my 91 190e 2.6? do i have to remove the cluster first. i believe i have a broken solder joint. no display, but if i push on the right side, get display. was going to take out and chk the solder joints but can't get it to come out.

thanks

MTI · #2 06-20-2005, 06:47 PM

To service the temp display does require removing the cluster. In the picture, the display unit is the wired unit in the center of the rear of the cluster.

kramlavud · #3 06-20-2005, 07:38 PM

About 2 weeks ago my display stopped working for a few days. Then it resumed, but it was very dim. Now it it back to nromal; any ideas?
regards,
Mark

skiier3_9 · #4 06-21-2005, 09:14 AM

the light bulb is probably dying or not properly connected. Take out your cluster and the temp gauge and check the bulb inside of it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
outside temp on dash display 300 sdl	stangsteve	Diesel Discussion	4	11-24-2003 08:48 AM
Outside temp display problem on E500	TomE500	Tech Help	18	06-17-2003 02:59 PM
newbie and outside temp display	mbdad	Tech Help	8	11-02-2002 02:42 PM
outside temp display gone bad again	arif	Tech Help	2	08-31-2002 03:44 PM
Funky outside temp display problem solved.	blackmercedes	Tech Help	2	05-30-2002 04:09 PM