M104 Wiring Harness swap

		PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help
M104 Wiring Harness swap

#12

06-27-2005, 05:50 PM

smharr4

Registered User

Join Date: Feb 2005

Posts: 255

Quote:

Originally Posted by Arthur Dalton

You can attemp to remobe the stud , but it does not secure the coil and is as I mentioned
The reason we do not remove them is cuz they are brass/copper for conductivity and being such, they break at both the head and the base , requiring drilling the head out and re-tapping.
So, if you want to take tham off , feel free.
.the coils just get stuck, mostly from the boot sticking.. I always use dielectic when renewing for next time around.

http://www.peachparts.com/shopforum/showthread.php?t=64285&highlight=coil+stud

Good to know that other peope found the same thing I did - thanks to you (and everyone else) for the advice!

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
'95 W320 T M104 Wiring Harness	d2bernhard	Tech Help	0	01-03-2005 06:05 PM
Wiring Harness Swap	cdanschwartz	Tech Help	8	09-27-2004 08:15 PM
Wiring Harness & Related Install (Longgggg)	Randall Grubbs	Mercedes-Benz Performance Paddock	4	02-01-2003 02:59 PM
Should I bite the bullet and install a new M104 wiring harness	philmartin	Tech Help	7	09-21-2002 05:09 PM
M104 ?? H-gasket, Wiring Harness	G-Man	Tech Help	2	10-31-2000 12:06 PM

All times are GMT -4. The time now is 03:39 PM.