|
|
|
|
|
#1
06-26-2005, 06:53 PM
|
|||
|
|||
|
Oil pressure problem on 94 E320.
My oil pressure reads about 1 3/4 when at idle and as soon as you accelerate the pressure goes up to the full 3. I have been told that it's normal it's a little lower at idle, but I have also been told that it should always be a 3. Can anyone confirm this? From doing a search it appears that it could be either the oil pressure sensor or the oil pump. Is there anyway to know which could be the problem? Btw: My car is a w124 94 E320.
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 617 engine, replacing the oil separator check valve in the upper oil pan. | dmorrison | Diesel Discussion | 52 | 12-29-2019 02:47 PM |
| Help! My '91 300E 2.6 has no oil pressure. | jfmccolgan | Tech Help | 4 | 01-29-2004 09:27 PM |
| SEL 600 oil pressure problem | monmoulds7 | Tech Help | 1 | 10-02-2003 10:40 AM |
| I have a Oil pressure problem 93 400 SEL | pilot2000 | Tech Help | 2 | 03-14-2002 04:32 PM |
| 1983 300sd oil pressure 2X too high | mike webb | Diesel Discussion | 0 | 08-09-2001 02:22 PM |
Threaded Mode
