|
|
|
|
|
|
#1
|
|||
|
|||
|
SL320 VIBRATION IN COLD IDLE & GEAR IN 'D'
Greetings everybody,
I am new to the forum and I would appreciate some help with a problem I have with my 1995 W129 SL320 (abt 100,000 miles). Last week I had the catalytic converter and the muffler changed - all was done in official MB dealer. Since then, whenever I start the car, lock the gear in 'D' to drive away, engine idling and I am still on the brakes, I feel a vibration / buzzing, which goes away after I rev up and drive away. The vibr / buzz is bit embarassing so after I drive away from the house and I stop at the 1st/2nd red traffic light (while engine is still cold) I prefer to shift in 'N' (no vibration then) and wait for the green light, than to feel the uncomfortable vibration. After the engine is warmed up (2-3 miles driving) - no unpleasant sounds, etc - all is normal. Above symptoms disappear when: -the car is either warmed up (no problem when idling in 'D' plus brakes) -or- -when although still cold, the revs exceed abt 1200. This happens only in 'D' position and not in 'P' or 'N', 'R' (as one would expect) - and only when the car is cold. Any ideas please? ++ |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| SL320 VIBRATION IN COLD IDLE & GEAR IN 'D' | detailas | Mercedes-Benz SL Discussion Forum | 4 | 08-01-2005 06:15 AM |
| 722.3/4 trans start gear [ 1st/2nd ?] | Arthur Dalton | Tech Help | 2 | 07-02-2005 06:34 AM |
| M606 cold idle control? | kggkgg | Diesel Discussion | 2 | 05-09-2005 01:27 PM |
| cold idle control? | Tony1628 | Tech Help | 0 | 05-06-2005 10:35 AM |
| 300E cold shift problem from 1st gear when cold !!! | Witoldma | Tech Help | 1 | 12-11-2002 05:38 AM |