|
|
|
|
|
#1
06-20-2006, 01:40 PM
|
|||
|
|||
|
Help Techs! Need to recharge 2002 S600 A/C...
Hello techs...
My shop installed a new expansion block and drier in a 2002 S600. Problem is, "A/C Off" light is illuminated. The compressor temp pressure switch is sensing low pressure and wont kick on the compressor so we can put refrigerant in it. Alldata has a "reprogram" porocedure using the "STAR tool" to reset the values for the temp. pressure sensor in order to let the compressor engage. Is there any way to do this if we dont have the "STAR" diag. tool??? We are thinging about direct wiring the compressor to force it to come on. Any problems with this? Thanks in advance... Peter Balias Huntington Auto Repair, Houston
__________________
Peter Balias pbalias@hotmail.com 1992 400E http://albums.photopoint.com/j/View?...103&p=46824109 
|
|
#2
06-20-2006, 07:03 PM
|
||||
|
||||
|
I'm not a tech, but according to one of the most respected techs at this forum, you couldn't do much better in Houston than a shop called "MPH Automotive". Owers name is Michael Haven if my memory serves me right.
__________________
Mike Murrell 1991 300-SEL - Model 126 M103 - SOHC "Fräulein"
|
 |
| Bookmarks |
|
|
Linear Mode
