QUICK HELP: Connector on 210 Drivers seat. - PeachParts Mercedes-Benz Forum

Eiknujrac · #1 08-12-2005, 03:26 PM

I'm removing the driver's seat in a 2002 E320, and I have all the bolts out and two of the electrical connectors disconnected. There are 3 connectors, 1 small black one, 1 small red one, and one large black one going to the memory module? I am having trouble disconnecting the large ~10 wire connector, and just want to know if anyone knows how to on here.

Thanks in advance. Stuck until I figure this out.

djanis99 · #2 08-12-2005, 05:47 PM

you slide it off. In one motion, slide the connector sideways and it will pop off. It is difficult to describe but once you do it, you will see that the connector is over engineered

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
190E manual seat base swapping	haasman	Tech Help	8	05-16-2005 10:19 PM
C124, how do i remove drivers seat?	mercafreaket	Tech Help	3	02-23-2005 04:12 PM
Driver's Seat Motor Stuck	Bryan Harter	Mercedes-Benz Performance Paddock	0	03-18-2004 11:57 PM
HELP! My drivers seat won't move back and forth!	satern	Tech Help	2	02-04-2004 07:29 PM
87 300D Driver's Power Seat Question	Marcb	Diesel Discussion	1	12-01-2003 04:09 PM