Hi friends
I really need help because my CLK 430 has the engine stopped ....
The car was idling and aftre 2 or 3 minute the engines shut down.....
I tried to restrt many times without luck, fuel pump was changed 1 year ago .
I tried to chek and there is fuel pressure because if I push the little valve on the engine the fuel spray out.
May be a bad crank position sensor?
I am working now and i can not see my car untill tomorrow morning when i will put the scanner to check the codes....
thanks a lot
Alberto

My guess crank sensor

Thanks i will do some test tomorrow.

after 8 h i managed and tha car started well after a little crank......
once home ei plug in the scanner and....nothing
ABSOLUTING nothing no error....i really do not know how MB is built....
I am sure now that is a CRANK position sender and i will order a new one and install before move again this car.....this cancer of car....
i really do not know why a BIG problem like this is not stored in memory......i also hed a problem like this 1 year ago it was the fuel pump and also without any error...
I hope that cahge this f... crank postion sesor will fix my problem....
thanks a lot¨
alberto

i found a wrech to loose the 8 torx and i removed the sensor, it looks ok but a little bit wet i think it is transmission oil.....yes an other new problem....
anyway monday i will buy a new sensor and try to restart the engine.

Hi
I chaged the crank position sensor and now the car is back on the street i did some test and it seems to satrt well even with hot engine.
Hope that this will help somebody the fix this kind of problem.
Th MB dealer said me that the sensor is new design.
hope that never fail again....
Alberto