![]() |
Need Trans rebuild info source
I seem to recall reading recently in a post about a manual (not sure if it was an online or offline source) someone used to guide them through a rebuild of their trans. Does anyone know of a good source for trans info specific to the 722.320 trans in my 86 300E?
Thanks, Gary |
|
I found the ATSG manual to have some good info, but also a frustrating amount of typographical errors, references to figure #'s that are not present, misplaced pages, upside down pictures and absence of important info like what the range of modulating pressures should be. I wouldn't recommend purchasing it unless they have revised and improved it quite a bit. :(
|
Well, I just purchased it online last night, so I'll let you know if I see any glaring errors. I'm going to print it out at work today or tomorrow. If you can tell me any specific errors I can check for, I'd appreciate it.
Gary |
I went to the discussion mentioned by pmizell and followed a link to http://www.transonline.com/ but they seem to be unavailable at this time. When I try to register it tells me that they aren't accepting any new registrations at this time. Anyone know any other sources of info for working on these transmissions?
Gary |
All times are GMT -4. The time now is 09:39 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website