I am looking to replace my transmission cooling lines(not the hose but the metal tubing). My concern is how many and now long are the tubes. i cant quiet remember?

thanks

order factory parts.

tom w

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.

I would agree with Tom, factory parts are your best bet. What happened to your original parts that they need replacement?

Gary

I intend to use factory parts but i was wondering what all i would need to order. and as for what hapened to them, 14 years of northern ohio winter is what happened to them

ask for the transmission cooling lines. your old ones will unbolt and the new ones bolt in. i haven t personally done it but that is all there is to it. i beleive i have seen on this site that fishing the old ones out is a little tricky.

tom w

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.

thanks alot for all your imput. i just recently bought a new tranny and before i take the old one out and put the new one in i figured i would go ahead and put the new lines on the new tranny befor i put it in.