![]() |
|
|
|
#1
|
||||
|
||||
W126 Under Engine Splash Shield
Do the W126 cars come with a splash shield under the front of the engine compartment? It looks as if there should be one but there isn't on mine. The W126 service CD shows there is for the W124.
__________________
Regards Warren Currently 1965 220Sb, 2002 FORD Crown Vic Police Interceptor Had 1965 220SEb, 1967 230S, 280SE 4.5, 300SE (W126), 420SEL ENTER > = (HP RPN) Not part of the in-crowd since 1952. |
#2
|
||||
|
||||
I don't have one on my 420 SE
Cheers
__________________
1988 W126 420 SE beware of fundamentalists! |
#3
|
||||
|
||||
I also do not have one on my 85 380 SE
__________________
95 E420 ( 76K) SOLD 85 380SE(125k) 95 SL500(72k) |
#4
|
||||
|
||||
i dont
but it looks like i should have one on my 90 350sdl. my 84 sec looks like it didnt have one.
tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual. ![]() ..I also have a 427 Cobra replica with an aluminum chassis. |
#5
|
||||
|
||||
Yes. I installed one on my 1983 280SE, and on my brother's 300SE. It is available in plastic or metal form, and it screws directly under the front of the engine to pre-drilled mounting points. However, it usually gets misplaced after some years in the workshop when someone or other forgets to put it back after a service, and the owner doesn't bother checking....
![]()
__________________
1983 w126 280SE - daily drive 1983 w123 200 - sold |
#6
|
||||
|
||||
My 89 300SE has one on it. The dealer lost it once and I made them replace it. It looks like someone lost it on my 91 190.
__________________
2009 CLS550 55,000 2004 ML350 144,000 2004 X5 95,000 2002 X5 165,000 1996 320S 155,000 (sold) 1991 190E 192,000 (sold) 1989 300SE 160,00 (sold) 1984 300D 210,000 owned since 85, (sold) 1984 300SD 160,000 (sold) |
#7
|
||||
|
||||
Your '89 300SE should have a large encapsulation panel underneath. With it removed, you can access things like the alternator from underneath and the engine oil drain plug.
The panel is held in place by 4 sheet metal type screws that have an 8mm head. I searched this sites parts dept. for one and didn't see it. This is one item I wouldn't have a problem obtaining from a junk yard. I suspect that if it's a dealer item, you'll pay dearly for it. Here's a photo of the screws: http://catalog.eautopartscatalog.com/smittys/sa/wizard.jsp?partner=smittys&clientid=sasponline.com&baseurl=http://www.sasponline.com/&cookieid=1LZ04S61F1LZ04SFTT&year=1989&make=MB&model=300-SE-001&category=Y&part=Screw
__________________
Mike Murrell 1991 300-SEL - Model 126 M103 - SOHC "Fräulein" |
#8
|
||||
|
||||
Thanks guys. It looks like there should be one, there are short plastic vertical pieces attached to the frame rails but no horizontal panel.The splash shield would extend the life of the serp. belt too.
__________________
Regards Warren Currently 1965 220Sb, 2002 FORD Crown Vic Police Interceptor Had 1965 220SEb, 1967 230S, 280SE 4.5, 300SE (W126), 420SEL ENTER > = (HP RPN) Not part of the in-crowd since 1952. |
#9
|
|||
|
|||
Mine came without, but since it's been summer I haven't had it on. Once the rain starts, I'll put it back on. Also, if anybody has a lowered car, it's a really good idea to keep the panel. Keeps your oil pan safe.
|
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to clean engine bay paint W126 | Mattman | Detailing and Interior | 1 | 04-02-2004 07:43 PM |
W126 engine loom and false firewall | Mattman | Tech Help | 0 | 03-04-2004 01:11 AM |
Engine mount R&R W126 - illustrated | Thomaspin | Tech Help | 19 | 05-13-2003 03:51 PM |
What is this on W126 engine? | RKreutzer | Tech Help | 5 | 03-27-2003 11:36 AM |
running a cold engine | frosty | Tech Help | 3 | 10-25-2002 03:03 AM |