|
|
|
#1
|
|||
|
|||
Help Needed With Heater Problem
I recently bought a 1991 300CE and the only issue with it involves the heater. The heater blows cold until the car is in motion and then it appears to work fine. My instinct tells me there is probably some sort of restriction going on here... the main water pump replaced 2k ago. I plan to have the system back flushed under pressure to try to clear out heater core. If this fails, I thought of checking the 2 auxillary water pumps next. How is this best done? Also, any other ideas/thoughts on this? Could the mono valve be the culprit? Many thanks to all in advance,
Jeff & Jo |
#2
|
|||
|
|||
this is normal. not to worry. heat doesn't come on until coolant temperature rises to a cetrtain level. don't start back flushing systems uneccessarily.
__________________
1989 300TE |
#3
|
||||
|
||||
Also...check you coolant level. Sometimes simple is overlooked
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
Bookmarks |
|
|