A few weeks ago you were in the process of assisting me determine why my a/c compressor was not operating normallly. Then the site crashed and I appearantly lost my post. Let me bring you up to date.

1. I tried 3 different Klimas. Compressor still did not function.
2. Refrigerant is charged properly. High and low pressures are OK.
3. Wiring klima teminals 5 to 7 turns the compressor on and the air is cold.
4. With engine running and a/c turned on I get battery voltage between klima terminals 5 and 10. I understand this indicates the push button assembly and the low pressure switch are OK.
5. I orginally asked how to test the 105/115 sensor. You replyed that should simply disconnect it. I did. No change.
6. You then suggested that I check the DCV at the klima TD terminal. I believe you indicated the reading should be between 4 and 6 volts.

This is where we stopped. I checked the DCV at the TD terminal and got one reading of 10.47 - 10.6 volts and a second reading of approximately 9.5 volts. I hope this indicates something. Please advise.

Thank you.

If you have a fax number? I will send you test info! LEAVE that number on private messages.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator