 
         
		
					|   | 
 | 
 | 
| 
 | 
|  | 
| 
			 
			#1  
			
			
			
			
			
		 | |||
| 
 | |||
|  190E 2.6 [M103] Problems with mixture and starting... 
			
			Lets see if u all can help a confused "swede"   oookay here we go!! I have problems to get the right CO-mixture, if i lean it rattles up to 2000RPM and then is the power coming, If I enrich the mixture it smokes really black (makes black spots on the ground) and takes about 2litres/10 kilometers, in both cases that little bastard is really tough to start up if the temperature is below 0 degrees Celsius/32 degrees farenheit Things that I've been changed since i bought it is: Complete mainfold with everything Distributor Cap and Rotor for the ignition Several sparkplugs The OVP-relay The fuel filtre Can it be the Oxygen sensor that's messy? The engine reacts if i connect/disconnect it P.S. I'll hope that you understand my bad english   
				__________________ Patrik Nilsson -83 230CE -88 230TE -87 http://www.hastonnet.se/putte/avatar-new.jpg | 
| 
			 
			#2  
			
			
			
			
			
		 | |||
| 
 | |||
| 
			
			Or could it be the battery that doesn't deliver the correct power to crank it? The starter spins normal, but regret to start! In short: I have two problems to solve, may you help me please 
				__________________ Patrik Nilsson -83 230CE -88 230TE -87 http://www.hastonnet.se/putte/avatar-new.jpg | 
|  | 
| Bookmarks | 
| 
 |  |