|
|
|
#1
|
||||
|
||||
95 S420 dropped remote, now doesn't work
The key/remote of the S420 dropped and now it doesn't operate the locks. Tried to reset per the manual with no effect. Thoughts?
Thanks, Sixto |
#2
|
||||
|
||||
The remote units on W140s usually are quite strong. I will try by removing the batteries and even fitting new ones. It wouldn't hurt and a small action like this one helps a lot.
When pressing the remote check the sending red lens on top and see if a small red diode blinks shortly. If it doesn't, then the remote key sender unit had it.
__________________
A. Rosich CL 500, 1998 S 500 L, 1998 E 320 T, 1995 [Sadly sold ] |
#3
|
||||
|
||||
I dropped mine, and it didn't work after that either. I pulled it apart carefully, and saw that one of the terminals from the button had cracked slightly away from the circuit board. I resoldered, and it works again.
__________________
1995 S600, 1 of 618 (sold) "Speed is just a question of money...how fast you wanna go?" LONG LIVE THE W140! Visit my Web Page at www.v12uberalles.com |
#4
|
||||
|
||||
Thanks for the tips!
Sixto |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|