While replacing the springs for a 2-3 shift flare on a 1993 500E tranny, I inadvertantly broke the plastic piece that goes on the end of the valve-body's gear-selector plunger ?

Does anyone know if this part can be ordered by itself, or do I need a whole new gear-selector plunger ?

It looks like it has the following pn# 126.277.02.43

TIA,

:-) neil
1988 E36T AMG
1993 500E

Not available!~ You have to buy the comlpete shaft..

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

Please let us know if these springs helped!

__________________
2012 E350
2006 Callaway SC560

I just did a similar thing on my 1987 Porsche 928S4 tranny. Its a MB 4 speed unit as well. I had a 2-3 flare and the springs seemed to cure it under lighter loads...its non existant now.

however when i put my foot to the floor i still get the slip/flare...rpms increase rapidily between the shift, then it grabs
I think i have clutch packs that are going.
157k miles and 450rwhp 424 rwtq now.

Does the MB tranny mate directly to the 928S4 engine.

How are you getting the 400+ HP ?

It would be interesting to have a 928S4 engine in a Mercedes.

:-) neil